All guides · Updated: 2026-11-10
The supermarket fridge attacks: what your business should check
On the night of 11 to 12 October 2026, the fridges in hundreds of supermarkets in France warmed up: someone had changed their temperature over the internet. On 2 November a second wave hit other European countries. The attackers got in through refrigeration controllers whose management page was open to the internet, using flaws the manufacturer had already fixed, on devices that hadn't been updated.
This isn't just a supermarket problem. A café, a butcher's, a pharmacy or a shop have the same kind of devices: cameras, an alarm, cooling controls, air conditioning, the router. If you can see them on your phone when you're away, they're connected to the internet one way or another. This guide tells you what to check and what to ask whoever installed them.
1. List what's connected
Think of everything that has an app, a management page or a technician who looks at it remotely:
- The cameras and the recorder (DVR or NVR).
- The alarm and door access.
- The cooling controls: the controller for the cold rooms and display cabinets, or the temperature log.
- The air conditioning and other remotely controlled equipment.
- The shop's router and Wi-Fi.
- The till or card terminal, if the supplier accesses it remotely.
Each one can be reached from outside in one of two ways. Through the manufacturer's platform: you log in to an app with an account and password, and the device connects outwards. This is usually the safer way, as long as the account has a strong password. Through an open port on the router: the technician opened a port to reach the device directly. This is the risky way, because anyone on the internet reaches the same management page they do.
2. Ask whoever installed it
Whoever installed the cooling, the cameras or the alarm can answer this in minutes. A message like this is enough:
“Hello. After the attacks on supermarket fridges, I'd like to confirm three things about the equipment you installed: 1) can it be reached directly from the internet, or only through the manufacturer's platform or a VPN? 2) has the factory password been changed? 3) is it running the manufacturer's latest software? If any of these isn't the case, when can you sort it out?”
If you have Danfoss AK-SM 800A series controllers, the manufacturer fixed the known flaws in version R4.3.1: check that yours is on that version or newer. If you have older models (AK-SM 800, AK-SC 355), ask whether they still get updates; if not, they should be kept out of reach of the internet. Other brands' equipment gets updates too: ask for the manufacturer's latest.
3. Get rid of factory passwords
- Change the password on each device and for each app account: a different one for each, kept in a password manager.
- Turn on two-step verification in the camera, alarm and cooling apps, where it exists.
- Ask the technician for an account of their own instead of sharing yours, and delete the accounts of anyone who no longer works with you.
4. Close open ports on the router
In the router's settings, look for Port Forwarding, NAT or Virtual Server, and also UPnP. Each forwarding rule is a door from the internet to a device in your shop. If you don't know what a rule does, ask before deleting it.
Careful: closing a port can cut off the technician's access, or the temperature alerts that reach your phone. Agree it with whoever installed it: remote access should go through a VPN or the manufacturer's platform, not an open port. That's what the US cyber security agency, CISA, recommends for this kind of equipment.
If the router belongs to your internet provider and you're not sure how to use it, the provider's helpline can show you the active rules.
5. If something has already gone wrong
- Unexplained temperatures, alarms switched off or settings changed: call the technician and keep the logs.
- Keep an independent thermometer in the cold rooms: a log that doesn't depend on the network tells you whether the stock stayed safe, and food safety rules tell you what to do when it didn't.
- Report the incident to your national cyber security agency: in the UK, the NCSC at
ncsc.gov.uk; in the US, CISA atcisa.gov/report.
What Excubitor sees, and what it doesn't
The free check doesn't see the devices in your shop: it only reads what is public about your domain. It tells you whether your website's certificate is valid, whether someone can send email pretending to be your business and what's missing from the security headers, with the evidence for each point. It's the other half of what can be seen from outside.
So you don't have to check again
We don't watch your devices, but we do watch your domain: Excubitor can check it every week and email you only when something changes. Free for 1 domain: run the check and press “Notify me”.
A text or email with a link: how to tell if it's really from the brand